ARE YOU TIRED OF PICKING BEADS UP OFF THE FLOOR?
Don't You Wish You Could...
Work on your bead project during a road trip
Have your beads ever gone flying around the car when the driver slammed on the brakes?
With Bead Board Envy, sudden stops are no problem! The high bumper helps to keep the beads on the board and the wells keep the beads organized.
Do you worry about your project getting bumped around during rest breaks?
With the Bead Board Envy Cover, your project is protected from accidental knocks and bumps.
CARRY YOUR BEADING PROJECT IN YOUR LUGGAGE
Wouldn't it be great if you didn't have to put all of the beads back in their containers?
With Bead Board Envy, you can leave your project on the board! Put on the cover and sleeve and throw it in your suitcase.
WALK AWAY FROM YOUR BEADING PROJECT WITHOUT WORRYING ABOUT PETS GETTING INTO IT?
Does your cat think your bead board makes a great pet bed?
With Bead Board Envy, you can put on the cover and walk away with peace of mind knowing that your project is protected.
Bead Board Envy has it all!
Bead Board Envy has deep wells to keep your beads in place and large drawers to store your beads, thread and cutters. It has a large work area made of Vellux to keep your beads from rolling around as you work.
Finally a Bead Board that Works for You!
This feature is unique to Bead Board Envy!
Keeping Track of the Bead Numbers
When you are working with a pattern that has a lot of bead colors, let's say greater than 10, it's difficult to keep track of which bead matches up to which letter in the pattern. Alphabet beads do the trick, but how do you keep them in place? Pins constantly get tangled up in your thread.
The Large Bead Board Envy now has 18 magnets corresponding to the 18 wells AND 18 more magnets in 2 equal rows for a total of 36 alphabet magnets: A-Z and 0-9. Each magnet stays put (if it does move, it's easily put back) and it doesn't get all tangled up in your thread. Don't need the magnets? Simply take them off and put them back in their box.
This Is A Revolutionary New Board!
Keep Your Beads Organized
18 deep wells, 36 lettered bead markers, keep all your beads in neat 'piles' according to the pattern you are beading. (10 wells and 25 bead markers on the small board)
Beads Don't All Roll Together
The board surface is made with Vellux* so your beads won't all roll into each other every time the board gets knocked.
Keep Your Supplies Handy
Wide drawers provide plenty of room for beads, thread, cutters, all of your supplies!
Lettered Wells to Match Your Pattern
Do you have a hard time remembering which bead matches up to which letter in your pattern? The deep wells keep your beads in neat 'piles' and the bead markers identify it's place in the pattern.
Deep Wells to Keep Your Beads Separated
No more worrying about the board getting jostled and all of the beads rolling into one big pile!
Bead Board Envy has built-in drawers that keep all of your supplies at your fingertips.
Drawers That Hold all Your Supplies
Traveling with Bead Board Envy is made easier because everything you need to take with you will fit into the drawer!
The Large Board Now Comes with ONE BIG Drawer!!
No more fumbling between 2 drawers trying to find what you are looking for, Bead Board Envy now comes with one big drawer that holds everything!
Love it, love it, love it!
I think you have really made me a beautiful, workable bead board and I am very happy.
High quality workmanship. I absolutely love it.
You have truly brought to market a completely new concept Having all my tools in one drawer and having up to 20 tubes of beads the size I use in the other
Two New Bead Board Envy Sizes!
Check out the latest edition to our lineup!
- Small - 8x11 Bead Board
- Mini - 8x8 Bead Board
NEW! BEAD BOARD COVER!
Protect Your Beads!
The Bead Board Cover is 80 - 90% effective in keeping your beads in place on the board while moving it around, even through summersaults!
Since each Bead Board is handmade, no 2 are exactly alike. The cover is made to fit each board, so it must be ordered at the time the board is ordered. Don't miss out!
Bead Board Envy Sleeve!
The Bead Board Envy Sleeve is a must-have if you are traveling with your bead board and you need to store it in your luggage. With the cover and the sleeve, there is no need to put all your beads back in the containers when traveling!
- 1KEEP EVERYTHING SECURE
The neoprene sleeve keeps everything securely in its place.
- 2POUCH TO HOLD YOUR SUPPLIES
The 8-inch pouch (included) holds all your beads and supplies.
- 3KEEP YOUR BOARD PROTECTED
The sleeve also helps protect your board from dirt and wear when not in use.
30 Day Money Back, No Questions Asked Guarantee!
Money Back Guarantee
You are fully protected by our 30 day money back guarantee. If you are not satisfied with your purchase, for any reason at all, simply return the board within 30 days of purchase and I will promptly issue a refund.
In addition, your board is guaranteed for 6 months against manufacturing defects. If anything goes wrong with your board in the first 6 months, send an email to email@example.com and I will make it right!
Customize Your Board!
- 1LARGE, MEDIUM, SMALL OR MINI
- 2WITH WELLS or NO WELLS
- 3WITH A DRAWER OR WITHOUT
If you see a fabric/vinyl/acrylic/elastic color combination that you LIKE or DON'T Like, please let me know in the comments section. I will attempt to email you to confirm vinyl and elastic colors when appropriate.
Do the Magnets come off?
Yes, there are tiny magnets embedded in the board which attract the ultra small magnets attached to the letter beads. The attraction is strong enough to keep the beads in place, but it does not prevent you from taking the beads off the board. The indentations in the Vellux will smooth out in a short amount of time.
What is the beading surface made of?
The beading surface is made of Vellux (TM) which is actually an awesome blanket made by Westpoint Home - www.vellux.com. I don't know who figured out that a blanket made a great beading surface, all I know is that it works great to keep the beads from flying all over the place.
Do the small and mini boards have wells?
No, since their work surface is so small, there isn't room to add wells.
Can I customize how my board will look?
I have been trying to standardize how fabrics are matched with the other options, but it is sometimes based on availability. If you have a strong preference for how you want your board to look, then let me know in the comment box of the checkout and I will work with you to make the box how you want it. The following shows the options that need to be decided.
1) If you purchase a board with a drawer than the acrylic color for the drawer front and the vinyl color for the wood under the drawer.
2) If you purchase a board with a cover, then the elastic color and the rickrack trim color that's on the inside of the cover.
What if I don't like the board once I receive it?
You have 30 days to return it, no questions asked, although I appreciate any feedback. It is through customer feedback that I have been able to improve the board.
You are responsible for the return shipping, however I can send you a return label for $10-$15 (depending on the size of the board) and deduct it from your refund.
What if something breaks after I've had it for a few months?
Your board is fully guaranteed for 6 months against defects. Email me at firstname.lastname@example.org with a picture of the damage and I will make it right.